Mounting and Dismounting Procedures (EAA/T)
Direct answer: Safe mounting and dismounting in Equine Assisted Activities and Therapy (EAA/T) depends on choosing the right horse and method for the specific rider, preparing a calm environment, using trained helpers with clear roles, and completing each step slowly and consistently.
Important update
Mounting and dismounting can be the most dangerous part of an EAA/T session. If there is any doubt about safety (horse behavior, equipment, environment, or volunteer readiness), the practitioner should not proceed and should change the plan or cancel the mount.
Key points
- Do no harm: choose the method that best fits the rider’s challenge, comfort, and contraindications.
- One person in charge: one lead practitioner assigns tasks and controls timing and communication.
- Environment first: low distractions, safe footing (preferably soft), and a calm pace.
- Horse spacing: keep approximately 1½ horse distance between horses to reduce kicking risk.
- Equipment rechecks: always recheck tack (especially the girth) before mounting and again about 5 minutes after moving off.
- Dignity and consent: maintain modesty, appropriate hand placement, and respect gender/age/religious boundaries.
What is it?
Mounting and dismounting procedures are structured methods used to help a rider get on and off a horse safely. In EAA/T, these procedures are not only about mechanics—they set the tone for the therapeutic session and can affect rider trust, relaxation, and outcomes.
Why is it high-risk?
- Horses may feel claustrophobic standing still near blocks, ramps, or groups of people.
- Horses can react to discomfort (back pain, girth pressure) or to a rider’s fear and tension.
- Changes in the mounting team, horse, or equipment can increase rider insecurity and reduce cooperation.
What is a safe procedure?
A safe procedure is one that minimizes risk for the rider, horse, volunteers, and practitioner while matching the rider’s physical and cognitive abilities. It should be rehearsed, clearly explained, and performed slowly, with defined positions and communication cues.
How do you choose the right method?
- Assess the rider’s impairment and how it presents on the day (tone, spasticity, weakness, motor planning, balance).
- Consider rider and horse personality and how change impacts trust.
- Know benefits and contraindications of each mount/dismount option (ground, block, ramp, lift).
- Choose a time and location with minimal distractions and suitable weather conditions.
How do you prepare the environment?
- Mount in a safe space, preferably in an arena with soft ground and controlled access.
- Reduce distractions (barking dogs, machinery, moving objects, horses passing nearby).
- Ensure volunteers understand their roles before entering and again just before mounting.
- Position the rider away from the horse’s head until instructed.
How do you prepare tack safely?
- Use a correctly fitting saddle; handle the saddle carefully so the horse is not struck on the back.
- Tighten the girth slowly and in stages; aggressive tightening can cause pain and reactions (including biting).
- Recheck the girth before mounting and again after several minutes of movement.
- Aim for secure but not restrictive tightness (commonly described as a finger gap, depending on horse and tack).
- Keep people safely positioned if girth adjustment may trigger discomfort.
Who is responsible during mounting and dismounting?
The practitioner in charge is responsible for the horse, equipment, volunteers, rider safety, and the overall environment. Everyone involved should know the plan, their position, and what to do if the horse steps back, fidgets, or becomes unsettled.
What should never be used?
- Unstable or inappropriate equipment such as ladders, lightweight plastic stools, or household step ladders.
- Improvised setups that place mounting out of sight of the practitioner.
How do you manage change and rider trust?
Many riders—especially those with severe physical disability—can be highly sensitive to changes in horse, tack, leader, side walkers, or mounting method. Where changes are likely to increase insecurity, the safest option may be to postpone or cancel the session.
Ground Mount
Used for riders who can step or be boosted safely, with a calm horse and an experienced team.
Mounting Block
Uses a solid, immovable block to reduce strain and improve alignment; team positions remain controlled.
Ramp Mount
Supports transfers from wheelchairs for riders who can stand with assistance, using a coordinated team approach.
Electric Lift Transfer
Provides a dignified, low-strain transfer when the horse is trained and the lift system is understood and checked.
Next steps
- Step 1: Confirm readiness
Assess rider needs, horse suitability, volunteer competence, and environmental distractions. - Step 2: Brief the team
Assign roles (leader, offside support, contra support, wheelchair support if needed) and explain the exact sequence. - Step 3: Prepare and recheck equipment
Check saddle fit, tighten girth in stages, set stirrups, and recheck before mounting. - Step 4: Execute slowly
Keep the horse balanced and square, use calm voice cues, and avoid rushing the rider’s body movements. - Step 5: Recheck after moving off
Stop shortly after starting the session to recheck girth and rider position, then continue.
Important clarification
This content describes common EAA/T mounting and dismounting approaches and highlights risk factors. Procedures must be adapted to the individual rider and horse, the facility’s rules, and staff training. If the situation becomes unsafe at any point, the session should pause or stop.
Frequently Asked Questions
What is the most dangerous part of an EAA/T session?
Mounting and dismounting are often the highest-risk moments because the horse can feel confined or uncomfortable and the rider’s movement can unbalance the horse.
Why must horses be spaced about 1½ horse distance apart?
This spacing helps keep horses out of kicking range during group mounting, reducing the chance of a rider being kicked while getting on.
Why is the girth checked more than once?
Horses may bloat during tightening, and the girth can loosen after movement. Rechecking before mounting and again after a few minutes improves safety and comfort.
Why do changes in helpers or equipment matter so much?
Some riders experience significant anxiety with change. Increased insecurity can prevent relaxation and reduce therapeutic benefit, and it may raise risk during mounting and dismounting.
When should a lift be preferred over manual mounting?
Lift transfers can be safer and more dignified for riders who would otherwise require heavy manual lifting, and they can reduce injury risk for practitioners and volunteers—provided the horse is trained for the lift and the team is competent with the equipment.
Closing CTA
Review your current mounting and dismounting routines and confirm that roles, equipment checks, and spacing rules are consistent for every session.
If you are updating your procedures, start by standardizing the briefing, the tack recheck points, and the slow, step-by-step communication used with the rider and team.